Filters

Showing 1-15 of 23 products

View 12/24/All

Departments

1-15 of 23 products

  • New
    Quickview

    LM359N

    Make - TI

    Feature

    • User Programmable Gain Bandwidth Product,Slew Rate, Input Bias Current, Output Stage Biasing Current and Total Device Power Dissipation
    • High Gain Bandwidth Product (ISET = 0.5 mA)
    • - 400 MHz for AV = 10 to 100
    • – 30 MHz for AV = 1
    • High Slew Rate (ISET = 0.5 mA)
    • - 60 V/μs for AV = 10 to 100
    • Current Differencing Inputs Allow High Common-Mode Input Voltages
    • Operates from a Single 5V to 22V Supply
    • Large Inverting Amplifier Output Swing, 2 mV
    • Low Spot Noise, 6 nV /√Hz, for f > 1 kHz
  • New
    Quickview

    LF355N

    Make - TI

    Feature

    • HIGH INPUT IMPEDANCE J-FET INPUT
    • STAGE HIGH SPEED J-FET OP-AMPs : up to 20MHz, 50V/ms OFFSETVOLTAGEADJUSTMENTDOESNOT
    • DEGRADEDRIFT OR COMMON-MODE
    • REJECTION AS IN MOST OF MONOLITHIC
    • AMPLIFIERS INTERNAL COMPENSATION AND LARGE
    • DIFFERENTIAL INPUTVOLTAGECAPABILITY (UP TO VCC+)
  • New
    Quickview

    LF353N

    Make - TI

    Feature

    • Internally Trimmed Offset Voltage: 10 mV
    • Low Input Bias Current: 50pA
    • Low Input Noise Voltage: 25 nV/√Hz
    • Low Input Noise Current: 0.01 pA/√Hz
    • Wide Gain Bandwidth: 4 MHz
    • High Slew Rate: 13 V/μs
    • Low Supply Current: 3.6 mA
    • High Input Impedance: 1012Ω
    • Low Total Harmonic Distortion : ≤0.02%
    • Low 1/f Noise Corner: 50 Hz
    • Fast Settling Time to 0.01%: 2 μs
     
  • New
    Quickview

    LM350T

    Make - TI

    Feature

    • Adjustable Output Down to 1.2V
    • Guaranteed 3A output Current
    • Guaranteed Thermal Regulation
    • Output is Short Circuit Protected
    • Current Limit Constant with Temperature
    • P+ Product Enhancement Tested
    • 86 dB Ripple Rejection
    • Ensured 1% Output Voltage Tolerance(LM350A)
    • Ensured Max. 0.01%/V Line Regulation (LM350A)
    • Ensured Max. 0.3% Load Regulation (LM350A)
  • New
    Quickview

    LM335Z

    Make - TI

    Feature

    • IRECTLY CALIBRATED IN oK .
    • 1oC INITIAL ACCURACY
    •  OPERATES FROM450mA TO 5mA
    • LESS THAN 1W DYNAMIC IMPEDANCE
  • New
    Quickview

    LM331N

    Make - TI

    Feature

    • Ensured Linearity 0.01% max
    • Improved Performance in Existing Voltage-to-Frequency Conversion Applications
    • Split or Single Supply Operation
    • Operates on Single 5V Supply
    • Pulse Output Compatible with All Logic Forms
    • Excellent Temperature Stability: ±50 ppm/°C max
    • Low Power Consumption: 15 mW Typical at 5V
    • Wide Dynamic Range, 100 dB min at 10 kHz Full Scale Frequency
    • Wide Range of Full Scale Frequency: 1 Hz to 100 kHz
    • Low Cost
  • New
    Quickview

    LM329DZ

    Make - TI

    Feature

    • 2• VOUT_RANGE
    • V to 4.5 V DC-DC
    • VOUT_APT = 0.4 V to 3.81 V (or VIN – 200 mV) • DC BOOST FOR ET OPERATION: – Boost Input Voltage Range: 2.5 V to 5 V – High-Efficiency (90% typical) with Internal Synchronous Rectification : – 2.7 MHz PWM Switching Frequencies • BUCK DC-DC FOR APT AND ET OPERATION: – High Operating Frequency – VOUT_RANGE = 0.6 V to min of 3.81 V VIN – 200 mV 2. In ET mode – High-Efficiency (95% typical) – Low-Power PFM Mode • LM3291 CONTROL: – Automatic Control of LM3291 in ET Mode • RFFE CONTROL INTERFACE: – 1.8 V MIPI – 26 MHz Write Capability – 13 MHz Read Capability
  • New
    Quickview

    LM305AH

    Make - TI

    Feature

    • Output voltage adjustable from 4.5V to 40V
    • Output currents in excess of 10A possible by adding external transistors
    •  Load regulation better than 0.1%, full load with current limiting
    • DC line regulation guaranteed at 0.03%/V
    • Ripple rejection on 0.01%V
    •  45 mA output current without external pass transistor (LM305A)
  • New
    Quickview

    LM304H

    Make - TI

    Feature

    • Subsurface zener reference
    •  1 mV regulation no load to full load
    • 0.01%/V line regulation
    •  0.2 mV/V ripple rejection
    • 0.3% temperature stability over military temperature range
  • New
    Quickview

    LM301AH

    Make -TI

    Feature

    • Improved Specifications include:
    •  Offset Voltage 3 mV Maximum Over i
    • Temperature (LM101A/LM201A)
    • Input Current 100 nA Maximum Over
    • Temperature (LM101A/LM201A) o
    •  Offset Current 20 nA Maximum Over of input current.
    • Temperature (LM101A/LM201A)
    • Slew Rate of 10V/μs as a Summing Amplifier
  • New
    Quickview

    LM158AH

    Make - TI

    Feature

    • Available in 8-Bump micro SMD chip sized package, (See AN-1112)
    •  Internally frequency compensated for unity gain
    •  Large dc voltage gain: 100 dB
    •  Wide bandwidth (unity gain): 1 MHz (temperature compensated)
    •  Wide power supply range: — Single supply: 3V to 32V — or dual supplies: ±1.5V to ±16V
    • Very low supply current drain (500 μA)—essentially independent of supply voltage
    •  Low input offset voltage: 2 mV
    •  Input common-mode voltage range includes ground
    •  Differential input voltage range equal to the power supply voltage
    •  Large output voltage swing
  • New
    Quickview

    LM139J

    Make - TI

    Feature

    • Single Supply or Dual Supplies
    •  Wide Range of Supply Voltage: − Max Rating . . . 2 V to 36 V − Tested to 30 V . . . Non-V Devices − Tested to 32 V . . . V-Suffix Devices
    •  Low Supply-Current Drain Independent of Supply Voltage . . . 0.8 mA Typ
    • Low Input Bias Current . . . 25 nA Typ
    •  Low Input Offset Current . . . 3 nA Typ (LM139)
    •  Low Input Offset Voltage . . . 2 mV Typ
    • Common-Mode Input Voltage Range Includes Ground
    •  Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . ±36 V
    •  Low Output Saturation Voltage
    •  Output Compatible With TTL, MOS, and CMOS
  • New
    Quickview

    LM111J

    ,

    Make - TI

    Feature

    • Fast Response Times
    • Strobe Capability
    • Maximum Input Bias Current . . . 300 nA
    • Maximum Input Offset Current . . . 70 nA
    • Can Operate From Single 5-V Supply
    • Available in Q-Temp Automotive – High-Reliability Automotive Applications – Configuration Control/Print Support – Qualification to Automotive Stan
  • New
    Quickview

    LM111H

    Make  - TI

    Feature

    •  Fast Response Time: 165 ns
    • Strobe Capability
    •  Maximum Input Bias Current: 300 nA
    •  Maximum Input Offset Current: 70 nA
    •  Can Operate From Single 5-V Supply
    •  Available in Q-Temp Automotive – High-Reliability Automotive Applications – Configuration Control and Print Support – Qualification to Automotive Standards
    •  On Products Compliant to MIL-PRF-38535,
    • All Parameters Are Tested Unless Otherwise
    • Noted. On All Other Products, Production
    • Processing Does Not Necessarily Include Testing of All Parameters.
  • New
    Quickview

    LM108H

    Make - TI

    Feature

    • Guaranteed 200pA max. input offset current
    • Guaranteed  2nA max. inout bias current
    • Guaranteed 600uA max. supply current
    • Guaranteed 0.5mV max. offset voltage
    • Guaranteed 5uV/C  max. Drift