-
-
QuickviewFFB0812VHE Fan
FANMake - Delta
Feature
- Bearing Type Ball Bearings
- Material Impeller & Frame : Plastic (UL 94V-0)
- Lead Wires : ,UL 1007 AWG #24 OR Equivalent Red Wire Positive (+) Black Wire Negative (-)
- Weight : 170g (6.00 oz)
-
Quickview
A12038H2SL FAN
FANMake - Compcon
Feature
- 220/240v
- AC
- 0.14A
- 50/60Hz
- Impedance protected
- size 5" * 5"
- Two wire fan
-
Quickview11938FB-A1N-EA
FANMake - NBM
Feature
- Motor Structure: Shaded Pole Induction Motor
- Motor Protection: Impedance Protection
- Insulation Resistance: 10M Ω or over with a DC500V Megger
- Dielectric Withstand Voltage: AC 700V 1s
- Allowable Ambient Temperature Range: -10°C ~ +70°C (Operating) -40°C ~ +70°C (Storage) (non-condensing environment)
-
QuickviewG2R-1 OMRON RELAY
RelayMake - OMRON
Feature
- 1General purpose power Relays of single-pole10 A and double-pole 5 A.
- Safety-oriented design with dielectric strength of 5,000 V between coil and contacts, and surge resistance of 10,000 V.
- AC and DC types are both available for operational coils.
-
QuickviewCSM025A Relay
RelayMake -CHIEFUL
Feature- Closed loop current sensor based on the principle of Hall-effect. It can be used formeasuring AC,DC,pulsed and mixed current.
-
QuickviewLCD Display HD128A
DISPLAYFeatures:
- Enhanced Version
- 5V or 9V power source
- Common or Isolated Ground
- Integrated adjustment settings on board
Measurement Ranges:
- DC Amps: 200mA
- AC Volts: 200V, 500V
- DC Volts: 200mV, 2V, 20V, 200V, 500V
-
QuickviewQX-38F-1Z Power Pelay
RelayMake - CILON
Technical Specification
Insulation Resistance ≥1000mΩ (500VDC) Dielectric strength Between coil and contacts ≥2500VAC1min Between open contacts ≥1200VAC1min Operate/ Release time ≤15ms/ 10ms Terminal Type PCB Contact Specification
Contact Form 2Z, 2H, 2D 3Z, 3H, 3D Contact Resistance ≤100mΩ (1A 6VDC) Contact Material AgCdO, AgSnO2 Contact Capacity A: 40A 250VAC/ 30VDC B: 30A 250VAC/ 30VDC Coil Specification
Rated Coil Power DC2.5W AC5VA -
QuickviewHF105F-2/012D-1ZST Relay
RelayMake - HONGFA
Feature
- 30A switching capability
- Heavy load up to 7200VA
- Class F insulation available
- 4 KV dielectric strength
-
-
-
-
QuickviewSolder Wire 18SWG-1/2KG
SOLDER WIRESpecifications
- : Aluminium
- : 2 kg/reel
- : With Lead
- : 22SWG-SN-9605/AG CU-0.5
- : SILVER
- : New Only
-
QuickviewLM234D HITACHI LCD Display Module
DISPLAYMake - HITACHI
Features :
- 16 characters wide, 2 rows
- White text on the blue background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
-
QuickviewV23042-A2003-B201 SIEMENS
RelayMake - SIEMENS
Features • 5A switching capacity. • Meets FCC Part 68 isolation. • Temperature compensated over operating range. • No magnetic interference between adjacent relays. • 2 Form C contact arrangement. • Standard 0.1” x 0.3” grid spacing in a DIP configuration. • Standard or sensitive DC coils through 48 volts. -
QuickviewHPDL1414 LED Display 4-Character Smart Alphanumeric
DISPLAYMake - HP
Features • Smart Alphanumeric Display Built-in RAM, ASCII Decoder and LED Drive Circuitry • Wide Operating Temperature Range –40°C to +85°C • Fast Access Time 160 ns • Excellent ESD Protection Built-in Input Protection Diodes • CMOS IC for Low Power Consumption • Full TTL Compatibility Over Operating Temperature Range VIL = 0.8 V VIH = 2.0 V • Wave Solderable • Rugged Package Construction • End-Stackable • Wide Viewing Angle -
-
-
-
-
-
QuickviewG2RL-2-IN-24VDC
RelayMake - Omron
Feature
- A wide variety of single pole, double pole, high-capacity (16 A) type and high-sensitivity type (250 mW) Relays are available.
- Low profile; 15.7 mm max. in height.
- Conforms to VDE (EN61810-1), UL508 and CSA22.2.
- IEC/EN 60335-1 conformed. (-HA Model)
- Satisfies ambient operating temperature requirement of 85°C and 105°C (-CV Model).
- Clearance and creepage distance: 8 mm / 8 mm min.
- Coil insulation system: Class F (UL1446).
- G2RL-1A-E-ASI: TV3 Rating models available.
-
QuickviewG2RL-2-IN-12VDC
RelayMake - Omron
Feature
- A wide variety of single pole, double pole, high-capacity (16 A) type and high-sensitivity type (250 mW) Relays are available.
- Low profile; 15.7 mm max. in height.
- Conforms to VDE (EN61810-1), UL508 and CSA22.2.
- IEC/EN 60335-1 conformed. (-HA Model)
- Satisfies ambient operating temperature requirement of 85°C and 105°C (-CV Model).
- Clearance and creepage distance: 8 mm / 8 mm min.
- Coil insulation system: Class F (UL1446).
- G2RL-1A-E-ASI: TV3 Rating models available.
-
QuickviewG2RL-1-IN-24VDC
RelayMake - Omron
Feature
- A wide variety of single pole, double pole, high-capacity (16 A) type and high-sensitivity type (250 mW) Relays are available.
- Low profile; 15.7 mm max. in height.
- Conforms to VDE (EN61810-1), UL508 and CSA22.2.
- IEC/EN 60335-1 conformed. (-HA Model)
- Satisfies ambient operating temperature requirement of 85°C and 105°C (-CV Model).
- Clearance and creepage distance: 8 mm / 8 mm min.
- Coil insulation system: Class F (UL1446).
- G2RL-1A-E-ASI: TV3 Rating models available.
-
QuickviewG2RL-1-IN-12VDC
RelayMake - Omron
Feature
- A wide variety of single pole, double pole, high-capacity (16 A) type and high-sensitivity type (250 mW) Relays are available.
- Low profile; 15.7 mm max. in height.
- Conforms to VDE (EN61810-1), UL508 and CSA22.2.
- IEC/EN 60335-1 conformed. (-HA Model)
- Satisfies ambient operating temperature requirement of 85°C and 105°C (-CV Model).
- Clearance and creepage distance: 8 mm / 8 mm min.
- Coil insulation system: Class F (UL1446).
- G2RL-1A-E-ASI: TV3 Rating models available.
-
-
-
QuickviewP30FC-1C-12VDC
RelayMake - LEONE
Feature
- Dimension : L * W * H (mm) 52 * 47 * 40
- Terminal Type : Solder
- Weight : 110 gm Approximately
-
Quickviewfan”6 115VAC – EBM – Germany
FANMake - EBM
Feature
- Dimensions: 92 x 92 x 25mm (3.62 x 3.62 x 1")
- Mounting Center: 82mm (3.25")
- Rating: 115VAC
- Current: 0.12 Amps
- Power: 11 W
- Frequency: 50/60Hz
- Bearing: Ball
- Speed: 3000 RPM
- Noise: 36 dBA
- Max Air: 40 CFM
- Max Pressure: 5.3 mmH2O
- Temperature: -40 to +70 C
- Hours: 40000
- Termination: 1/8" Terminals
- Weight: 280g
- Impeller: Glass fibre reinforced plastic 94V-0 PBT
- Frame: Die-cast aluminum
-
QuickviewBalanced Force Relay (2R VDC 600)
RelayFeature
- Balanced-Force design.
- Hermetically sealed, corrosion protected metal can.
- Intrinsically safe relay
-
-
-
-
-
QuickviewREC22060 R B2 W-REXNORD
FAN, Passive ComponentsMAKE – REXNORD
- Motor design : Shaded Pole
- Housing : Aluminium die cast
- Impeller : Nylon 66
- Bearing : ball bearing
- Operating voltage : 230v (185-245 vac)
- Insulation resistence: above 100m ohm at 500 vdc
-
QuickviewFAN REC21725 B2
FAN, Passive ComponentsMAKE – REXNORD
- Motor Design : Shaded Pole
- Insulation Resistance : Above 100M Ohms at 500 VDC
- Operating Voltage : 115V (85 ~ 125 VAC)
- Net Weight : 850 Grams
- Operating Temperature:- 10 to +70 C for Sleeve Bearing
-
-
QuickviewFAN REC22038-B2-MT
FAN, Passive ComponentsMAKE – REXNORD
- Motor design : shaded pole
- Housing : aluminium die-cast (printed black)
- Impellor : thermoplastic PBT (UL 94V-0)
- Bearing : sleeve or ball
- Operating voltage: 185-245 VAC
-
QuickviewRELAY G2RL-2-IN-12VDC
Passive Components, RelayMAKE – OMRON
• A wide variety of single pole, double pole, high-capacity (16 A) type and high-sensitivity type (250 mW) Relays are available. • Low profile; 15.7 mm max. in height. • Conforms to VDE (EN61810-1), UL508 and CSA22.2. • IEC/EN 60335-1 conformed. (-HA Model) • Satisfies ambient operating temperature requirement of 85°C and 105°C (-CV Model). • Clearance and creepage distance: 8 mm / 8 mm min. • Coil insulation system: Class F (UL1446). -
-
-
-
QuickviewTHERMOSTAT T12A 090 05 L310 U250
Passive Components, ThermostatMAKE - MICROTHERM
Features- Automatic action - 1.C.M, 2.C 2.B, 1.C, 3.C 1.B, 2.C
- contact resistance ( incl. wire of 100 mm ) - < 50 mΩ
- hysteresis - 30 °C ± 15 °C 3) 4)
-
QuickviewTHERMOSTAT T11A 100 05 L310 U112
Passive Components, ThermostatMAKE - MICROTHERM
Features- Automatic action - 1.C.M, 2.C 2.B, 1.C, 3.C 1.B, 2.C
- contact resistance ( incl. wire of 100 mm ) - < 50 mΩ
- hysteresis - 30 °C ± 15 °C 3) 4)
-
QuickviewTHERMOSTAT R23T 090 05 H S TR 80+-5 A323C
Passive Components, ThermostatMAKE - MICROTHERM
-
QuickviewTHERMOSTAT R23N 190 07 Ho TR160 +- 10 A323C
Passive Components, ThermostatMAKE - MICROTHERM
-
QuickviewTHERMOSTAT B12A 090 05 D G L310 U253
Passive Components, ThermostatMAKE - MICROTHERM
Features- Non-sensitive to current
- High current rating up to 30 A
- Manifold executions
- Special low voltage execution
-
-
-
-
Quickview
HALL EFFECT CURRENT SENSOR NV25 P
HALL EFFECT CURRENT SENSOR, Passive ComponentsMAKE - TEG
Features:- Hall effect measuring principle
- Galvanic isolation between primary and secondary circuit
- Insulated plastic case made of white PPO recognized according to UL 94-V0
- The whole voltage transducer comply with RoHS Directive completely
-
QuickviewHALL EFFECT CURRENT SENSOR NCA1C 500A
HALL EFFECT CURRENT SENSOR, Passive ComponentsMAKE - TEG
Features- Open loop
- Supply voltage: ±15V DC
- Through hole primary
- Frame mounting
- Voltage output
- Can be customised
-
QuickviewHALL EFFECT CURRENT SENSOR NA305 S
HALL EFFECT CURRENT SENSOR, Passive ComponentsMAKE - TEG
DETAILS- Airports
- In-house handling
- Packaging and confectionary
- Paper industry
- Punching and cutting
- Wood industry
- Magnetic conveying
- Tanning industry
-
QuickviewHALL EFFECT CURRENT SENSOR LAH 100P
HALL EFFECT CURRENT SENSOR, Passive ComponentsMAKE - LEM
Features- Closed loop (compensated) current
- transducer using the hal effect
- printed circuit board mounting
- insulated plastic case recognized according to UL 94-V0.
-
-
Sale
QuickviewHall Effect Current Sensor LEM HY25P
HALL EFFECT CURRENT SENSOR, Passive ComponentsMake - LEM
Features- Hall effect measuring principle
- Galvanic isolation between primary and secondary circuit
- Isolation voltage 2500 V~
- Compact design for PCB mounting
- Low power consumption
- Extended measuring range (3 x I PN)
- Insulated plastic case recognized according to UL 94-V0.
₹850.00₹575.00
